OSP & Enclosures

Part # AMT – Holland Electronics Multiport Terminal

Holland Electronics offers network distribution points in various configurations and footprints. The Holland Electronics Multiport Terminal (AMT) is ideally suited for applications where customization and future expansion is required. Various port options and connector styles allow for flexibility and customization depending on the number of outputs needed. Robust plastic design is factory sealed to guarantee IP67 / 68 ingress protection and applicable GR-771-Core requirements. An optional removable shield is available for added protection.

Part # Mini AMT – Holland Electronics Multiport Terminal

Holland Electronics offers network distribution points in various configurations and footprints. The Mini Holland Electronics Multiport Terminal (Mini AMT) is ideally suited for applications where minimal space impact is desired. Various port options and connector styles allow for flexibility and customization depending on the number of outputs needed. The housing accommodates splitters in 1x4, 1x8 and 1x12 formats. Robust plastic design is factory sealed to guarantee IP67 / 68 ingress protection and applicable GR-771-Core requirements.

Part # Z14 Generation II Low-Profile Housing

Next generation CATV network upgrades, including Remote PHY (R-PHY), MAC-PHY, Node + 0, Node + N, etc., are placing increasing thermal and space demands on outside plant pedestal housings. New R-PHY optical nodes are being engineered to dissipate 160 Watts of power; significantly greater than prior generations of pedestal housings were designed to accommodate.

Part # Louvered Low-Profile Housing (LLPH)

Holland Electronics Louvered Low-Profile Housing provides mounting facilities and security for amplifiers, nodes and other equipment.The louvered vents provide excellent heat dissipation with louvered protection.

Part # Louvered Vertical Pedestals

Holland’s Louvered Vertical Plastic Pedestals provide mounting facilities and security for line extenders, amplifiers and other equipment. The louvered vents provide excellent heat dissipation with louvered protection.

Part # Non-Louvered Pedestals (NLP)

The Holland Electronics Non-Louvered Vertical Plastic Pedestals provide mounting facilities and security for taps, splitters and line extenders. These pedestals are molded from a polyethylene specifically designed to resist impact, ultraviolet and environmental degradation.

Part # HDPE Below Grade Enclosure

The Holland Electronics HDPE Below Grade Enclosures (HBGE) are lightweight, molded polyethylene handholes. Designed for light duty placements (parkway/greenway applications), these sturdy below grade enclosures serve a variety of purposes in telecommunications, wireless, utility, Broadband CATV and municipality networks.

Part # Z24 Generation II Low-Profile Housing with Extended Depth Base

The Holland Electronics Z24 pedestal housing was engineered specifically to meet the demands of next generation CATV network architectures and equipment. It is built to withstand the harsh elements typically found in outside plant deployments. Leveraging our expertise in outside plant enclosure engineering, thermal analysis, design and testing, the Z24 is capable of supporting R-PHY compliant equipment across all regions in the USA.

Part # Multi-Purpose Housing CMPH-7C

The Holland Electronics Multi-Purpose Housing CMPH-7C is widely deployed across wireline and wireless service providers, cable television operators and utility companies. The enclosure is designed for new provisioning installations as well as rehabilitation of existing access enclosures. The superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses.

Part # R02 Round Profile Vertical Broadband Pedestal

The R02 pedestal has a round profile dome which is self-latching for reduced chance of being left unlocked. The depth of the dome provides sufficient clearance to support the bend radius of fiber drops exiting a fiber terminal or coax drop cables exiting the RF directional tap. The dome’s height provides ample space for stacked interconnected directional taps with splitters and directional coupler housings in a single pedestal. These pedestals are molded from a polyethylene resin specifically designed for outside plant environments, resisting impact, ultraviolet and environmental degradation.

Part # Composite Mounting Pad (CPAD) Alpha Power Supply Cabinet

This Composite Pad (CPAD) that replaces poured-in-place or pre-cast concrete pads. The CPAD enables carriers to more rapidly deploy their network by eliminating days of project work for poured-in-place concrete pads, and the heavy equipment requirements and safety concerns of handling and transporting pre-cast concrete pads.

Part # Z05 / Z06 Vented Vertical Pedestals

Holland's Z05 and Z06 series vented vertical pedestals provide ease of installation and maintenance and robust protection for active and passive devices, including fiber components in below-grade outside plant cable environments.

Part # FDE – Fiber Demarcation Enhanced Access Box

Holland Electronics offers a fiber demarcation wall-mount enclosure that provides improved flexibility and versatility for a variety of indoor applications.

Part # Fiber Demarcation Box Gen 3 (FD3)

Holland Electronics has released an expanded capacity fiber demarcation wall-mount enclosure that provides flexibility and versatility for a variety of indoor applications.

Part # FSB – Fiber Splice Boxes

The FSB series of indoor wall mount enclosures are designed for centralized splice-only applications. These boxes are well suited as optical cable splice collection points for DAS (Distributed Antenna Systems), MTU (Multi-Tenant Unit) commercial business applications and MDU (Multi-Dwelling Unit) residential fiber network applications, to name a few.

Part # Microduct Manifold

Holland Electronics introduces a new Microduct Manifold to organize and secure microduct tubes. The innovative design of this new manifold achieves strong and consistent tube retention force across all tube positions.

Part # Slack Storage Box

Holland Electronics offers a Slack Storage Box (SSB) that employs a craft-friendly design to protect, organize and store fiber slack.

Part # OSP Optical Splice Solutions

Holland Electronics offers a complete line of optical splice closures for any application as well as a range of splitters and components. With aerial, pole, wall mount, pedestal and below grade options, Holland Electronics fiber splice solutions are designed to be the most versatile, user-friendly and cost-effective on the market.

Part # Fiber Sealed Drop Closures (FSDC-H)

The Holland Electronics fiber optic sealed drop closures (FSDC) provide a versatile and functional cost-effective solution for FTTH network connections to the subscriber.

Part # IPE12123-LTC

12 X 12 X 3 PREMISES ENCLOSURE, QUICK MOUNT, 3 SCREWS, LOCKING INSERT

Part # IPE994-LTC

9 X 9 X 4 PREMISES ENCLOSURE, QUICK MOUNT, 3 SCREWS, LOCKING INSERT

Part # IPE872-LTC

Part # Universal Broadband Enclosure (CUBE)

CUBE Battery Backup (BBU) cabinets are ideally suited for head ends, hub sites, cell sites and other outdoor environments when a large amount of battery backup is required. Multiple BBU cabinets can be combined to achieve an even greater amount of battery backup time or string redundancy. BBU cabinets can be installed adjacent to or remotely from other CUBE Site Support (CUBE-SS) Power Enclosures.